diff --git a/ct/debian-v3.sh b/ct/debian-v3.sh
index 7e2e371d..b6ec7ea8 100644
--- a/ct/debian-v3.sh
+++ b/ct/debian-v3.sh
@@ -79,8 +79,10 @@ function default_settings() {
 		RAM_SIZE="512"
 		echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 		NET=dhcp
-		echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
-        VLAN=" "
+		echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+		GATE=" "
+                echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+                VLAN=" "
 }
 
 function advanced_settings() {
@@ -209,6 +211,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -230,6 +255,7 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
 
 read -p "Are these settings correct(y/n)? " -n 1 -r
diff --git a/ct/docker-v3.sh b/ct/docker-v3.sh
index 1420c176..6b05fe5a 100644
--- a/ct/docker-v3.sh
+++ b/ct/docker-v3.sh
@@ -77,9 +77,11 @@ function default_settings() {
 		echo -e "${DGN}Using ${BGN}2048MiB${CL}${DGN} RAM${CL}"
 		RAM_SIZE="2048"
 		echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
-		NET=dhcp
-		echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
-        VLAN=" "
+                NET=dhcp
+		echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+		GATE=" "
+                echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+                VLAN=" "
 }
 
 function advanced_settings() {
@@ -208,6 +210,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -229,6 +254,7 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
 
 read -p "Are these settings correct(y/n)? " -n 1 -r
diff --git a/ct/esphome-v3.sh b/ct/esphome-v3.sh
index 75d44abc..2d6fa4c3 100644
--- a/ct/esphome-v3.sh
+++ b/ct/esphome-v3.sh
@@ -80,8 +80,10 @@ function default_settings() {
 		RAM_SIZE="1024"
 		echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 		NET=dhcp
-		echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
-        VLAN=" "
+		echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+		GATE=" "
+                echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+                VLAN=" "
 }
 
 function advanced_settings() {
@@ -210,6 +212,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -231,8 +256,8 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
-
 read -p "Are these settings correct(y/n)? " -n 1 -r
 echo
 if [[ ! $REPLY =~ ^[Yy]$ ]]
diff --git a/ct/homeassistant-v3.sh b/ct/homeassistant-v3.sh
index 72bae187..f147cfe7 100644
--- a/ct/homeassistant-v3.sh
+++ b/ct/homeassistant-v3.sh
@@ -78,8 +78,10 @@ function default_settings() {
 		RAM_SIZE="2048"
 		echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 		NET=dhcp
-		echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
-        VLAN=" "
+		echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+		GATE=" "
+                echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+                VLAN=" "
 }
 
 function advanced_settings() {
@@ -208,6 +210,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -229,6 +254,7 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
 
 read -p "Are these settings correct(y/n)? " -n 1 -r
diff --git a/ct/photoprism-v3.sh b/ct/photoprism-v3.sh
index 71a9ef3e..7c90ac2e 100644
--- a/ct/photoprism-v3.sh
+++ b/ct/photoprism-v3.sh
@@ -79,8 +79,10 @@ function default_settings() {
 		RAM_SIZE="2048"
 		echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 		NET=dhcp
-		echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
-        VLAN=" "
+		echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+		GATE=" "
+                echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+                VLAN=" "
 }
 
 function advanced_settings() {
@@ -209,6 +211,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -230,6 +255,7 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
 
 read -p "Are these settings correct(y/n)? " -n 1 -r
diff --git a/ct/podman-homeassistant-v3.sh b/ct/podman-homeassistant-v3.sh
index c92ac739..15c837b7 100644
--- a/ct/podman-homeassistant-v3.sh
+++ b/ct/podman-homeassistant-v3.sh
@@ -84,8 +84,10 @@ function default_settings() {
 		RAM_SIZE="2048"
 		echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 		NET=dhcp
-		echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
-        VLAN=" "
+		echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+		GATE=" "
+                echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+                VLAN=" "
 }
 
 function advanced_settings() {
@@ -214,6 +216,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -235,6 +260,7 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
 
 read -p "Are these settings correct(y/n)? " -n 1 -r
diff --git a/ct/technitiumdns-v3.sh b/ct/technitiumdns-v3.sh
index 332221a8..761150f1 100644
--- a/ct/technitiumdns-v3.sh
+++ b/ct/technitiumdns-v3.sh
@@ -79,8 +79,10 @@ function default_settings() {
 		RAM_SIZE="512"
 		echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 		NET=dhcp
-		echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
-        VLAN=" "
+		echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+		GATE=" "
+               echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+               VLAN=" "
 }
 
 function advanced_settings() {
@@ -209,6 +211,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -230,6 +255,7 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
 
 read -p "Are these settings correct(y/n)? " -n 1 -r
@@ -267,7 +293,7 @@ export PCT_DISK_SIZE=$DISK_SIZE
 export PCT_OPTIONS="
   -features $FEATURES
   -hostname $HN
-  -net0 name=eth0,bridge=vmbr0,ip=$NET
+  -net0 name=eth0,bridge=vmbr0,$GATE,ip=$NET
   $VLAN
   -onboot 1
   -cores $CORE_COUNT
diff --git a/ct/zigbee2mqtt-v3.sh b/ct/zigbee2mqtt-v3.sh
index e4dd28d3..aafd2f5f 100644
--- a/ct/zigbee2mqtt-v3.sh
+++ b/ct/zigbee2mqtt-v3.sh
@@ -80,7 +80,9 @@ function default_settings() {
 	RAM_SIZE="1024"
 	echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 	NET=dhcp
-	echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+	echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+	GATE=" "
+        echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
         VLAN=" "
 }
 
@@ -210,6 +212,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -231,8 +256,8 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
-
 read -p "Are these settings correct(y/n)? " -n 1 -r
 echo
 if [[ ! $REPLY =~ ^[Yy]$ ]]
diff --git a/ct/zwavejs2mqtt-v3.sh b/ct/zwavejs2mqtt-v3.sh
index 74a2e586..0d9d226e 100644
--- a/ct/zwavejs2mqtt-v3.sh
+++ b/ct/zwavejs2mqtt-v3.sh
@@ -79,7 +79,9 @@ function default_settings() {
 	RAM_SIZE="1024"
 	echo -e "${DGN}Using IP Address ${BGN}DHCP${CL}"
 	NET=dhcp
-	echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
+	echo -e "${DGN}Using Gateway Address ${BGN}NONE${CL}"
+	GATE=" "
+        echo -e "${DGN}Using VLAN Tag ${BGN}NONE${CL}"
         VLAN=" "
 }
 
@@ -209,6 +211,29 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${YW}Enter a Gateway IP, or Press [ENTER] for Default: NONE "
+        read GATE1
+        if [ -z $GATE1 ]; then GATE1="NONE" GATE=" "; 
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        else
+          GATE="gw=$GATE1"
+        echo -en "${DGN}Set Gateway IP To ${BL}$GATE1${CL}"
+        fi;
+echo -e " ${CM}${CL} \n"
+sleep 1
+clear
+header_info
+
+        echo -e "${RD}Using Advanced Settings${CL}"
+        echo -e "${DGN}Using CT Type ${BGN}$CT_TYPE1${CL}"
+        echo -e "${DGN}Using CT Password ${BGN}$PW1${CL}"
+        echo -e "${DGN}Using ID ${BGN}$CT_ID${CL}"
+        echo -e "${DGN}Using CT Name ${BGN}$HN${CL}"
+        echo -e "${DGN}Using Disk Size ${BGN}$DISK_SIZE${CL}"
+        echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
+        echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
+        echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${YW}Enter a VLAN Tag, or Press [ENTER] for Default: NONE "
         read VLAN1
         if [ -z $VLAN1 ]; then VLAN1="NONE" VLAN=" "; 
@@ -230,6 +255,7 @@ header_info
         echo -e "${DGN}Using ${BGN}${CORE_COUNT}vCPU${CL}"
         echo -e "${DGN}Using ${BGN}${RAM_SIZE}MiB${CL}${DGN} RAM${CL}"
         echo -e "${DGN}Using IP Address ${BGN}$NET${CL}"
+        echo -e "${DGN}Using Gateway IP Address ${BGN}$GATE1${CL}"
         echo -e "${DGN}Using VLAN Tag ${BGN}$VLAN1${CL}"
 
 read -p "Are these settings correct(y/n)? " -n 1 -r