Update README.md

This commit is contained in:
tteckster 2021-11-29 11:14:04 -05:00 committed by GitHub
parent a646d33a03
commit a714cb8cdd
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 34 additions and 22 deletions

View File

@ -12,7 +12,7 @@
This script will Disable the Enterprise Repo, Add & Enable the No-Subscription Repo, Add & Disable Test Repo (repo's can be enabled/disabled via the UI in Repositories)
and attempt the *No-Nag* fix.
Run the following in the Proxmox Web Shell. ⚠️ *_PVE7 ONLY_*
Run the following in the Proxmox Web Shell. ⚠️ **PVE7 ONLY**
```
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/post_install.sh)"
@ -71,31 +71,37 @@ After the script completes, If you're dissatisfied with the default settings, cl
**Home Assistant Interface - IP:8123**
Path to HA /config
⚙️ **Path to HA /config**
```
/var/lib/containers/storage/volumes/hass_config/_data
```
To edit the HA configuration.yaml (run from the Home Assistant container LXC console)
⚙️ **To edit the HA configuration.yaml**
Run from the LXC console
```
nano /var/lib/containers/storage/volumes/hass_config/_data/configuration.yaml
```
Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
To autostart Home Assistant at every boot (run from the LXC console)
⚙️ **To autostart Home Assistant at every boot:**
Run from the LXC console
```
podman generate systemd \
--new --name homeassistant \
> /etc/systemd/system/homeassistant.service
systemctl enable homeassistant
```
Check the status of homeassistant service (run from the LXC console)
⚙️ **Check the status of homeassistant service:**
Run from the LXC console
```
systemctl status homeassistant
```
**To install HACS:**
⚙️ **To install HACS:**
Run the following from the Home Assistant Container LXC console
Run the from the LXC console
```
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/podman_hacs.sh)"
```
@ -128,20 +134,22 @@ After the script completes, If you're dissatisfied with the default settings, cl
**Portainer Interface - IP:9000**
Path to HA /config
⚙️ **Path to HA /config**
```
/var/lib/docker/volumes/hass_config/_data
```
To edit the HA configuration.yaml (run from the Home Assistant container LXC console)
⚙️ **To edit the HA configuration.yaml**
Run from the LXC console
```
nano /var/lib/docker/volumes/hass_config/_data/configuration.yaml
```
Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
**To allow device passthrough:**
⚙️ **To allow device passthrough:**
In the Proxmox web shell run (replace 106 with your LXC ID)
In the Proxmox web shell run (**replace `106` with your LXC ID**)
```
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/autodev.sh)" -s 106
```
@ -149,9 +157,9 @@ bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/auto
Reboot the LXC to apply the changes
**To install HACS:**
⚙️ **To install HACS:**
Run the following from the Home Assistant Container LXC console
Run the from the LXC console
```
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/hacs.sh)"
```
@ -438,9 +446,9 @@ bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/zigb
<h3 align="center" id="heading">⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡</h3>
**To allow device passthrough:**
⚙️ **To allow device passthrough:**
In the Proxmox web shell run (replace 106 with your LXC ID)
In the Proxmox web shell run (**replace `106` with your LXC ID**)
```
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/autodev.sh)" -s 106
```
@ -448,7 +456,9 @@ bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/auto
Reboot the LXC to apply the changes
Determine the location of your adapter (Run in the zigbee2mqtt console)
⚙️ **Determine the location of your adapter**
Run in the zigbee2mqtt console
```
ls -l /dev/serial/by-id
```
@ -481,15 +491,15 @@ advanced:
network_key: GENERATE
channel: 20
```
Zigbee2mqtt can be started after completing the configuration by running
⚙️ **Zigbee2mqtt can be started after completing the configuration**
```
sudo systemctl start zigbee2mqtt
```
To start Zigbee2MQTT automatically on boot
⚙️ **To start Zigbee2MQTT automatically on boot**
```
sudo systemctl enable zigbee2mqtt.service
```
To update Zigbee2Mqtt
⚙️ **To update Zigbee2Mqtt**
```
cd /opt/zigbee2mqtt
bash update.sh
@ -514,16 +524,18 @@ bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/zwav
```
<h3 align="center" id="heading">⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡</h3>
To start Zwavejs2Mqtt (run from the LXC console)
⚙️ **To start Zwavejs2Mqtt**
Run from the LXC console
```
cd zwavejs2mqtt
./zwavejs2mqtt
```
**Zwavejs2MQTT Interface - IP:8091**
**To allow device passthrough:**
⚙️ **To allow device passthrough:**
In the Proxmox web shell run (replace 106 with your LXC ID)
In the Proxmox web shell run (**replace `106` with your LXC ID)**
```
bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/autodev.sh)" -s 106
```