variables() { NSAPP=$(echo ${APP,,} | tr -d ' ') # This function sets the NSAPP variable by converting the value of the APP variable to lowercase and removing any spaces. var_install="${NSAPP}-install" # sets the var_install variable by appending "-install" to the value of NSAPP. INTEGER='^[0-9]+([.][0-9]+)?$' # it defines the INTEGER regular expression pattern. } # This function sets various color variables using ANSI escape codes for formatting text in the terminal. color() { YW=$(echo "\033[33m") BL=$(echo "\033[36m") RD=$(echo "\033[01;31m") BGN=$(echo "\033[4;92m") GN=$(echo "\033[1;92m") DGN=$(echo "\033[32m") CL=$(echo "\033[m") CM="${GN}✓${CL}" CROSS="${RD}✗${CL}" BFR="\\r\\033[K" HOLD="-" } # This function enables error handling in the script by setting options and defining a trap for the ERR signal. catch_errors() { set -Eeuo pipefail trap 'error_handler $LINENO "$BASH_COMMAND"' ERR } # This function is called when an error occurs. It receives the exit code, line number, and command that caused the error, and displays an error message. error_handler() { local exit_code="$?" local line_number="$1" local command="$2" local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}" echo -e "\n$error_message\n" } # This function displays an informational message with a yellow color. msg_info() { local msg="$1" echo -ne " ${HOLD} ${YW}${msg}..." } # This function displays a success message with a green color. msg_ok() { local msg="$1" echo -e "${BFR} ${CM} ${GN}${msg}${CL}" } # This function displays an error message with a red color. msg_error() { local msg="$1" echo -e "${BFR} ${CROSS} ${RD}${msg}${CL}" } # Run as root only check_root() { if [[ "$(id -u)" -ne 0 || $(ps -o comm= -p $PPID) == "sudo" ]]; then clear msg_error "Please run this script as root." echo -e "\nExiting..." sleep 2 exit fi } # This function checks the version of Proxmox Virtual Environment (PVE) and exits if the version is not supported. pve_check() { if [ $(pveversion | grep "pve-manager/8" | wc -l) -ne 1 ]; then whiptail --backtitle "Proxmox VE Helper Scripts" --msgbox --title "Proxmox VE 7 Detected" "You are currently using Proxmox VE 7, refrain from creating Debian 12 LXCs due to differences in locale parameters. \n Default distribution for $APP LXC is ${var_os} ${var_version}" 10 58 fi if ! pveversion | grep -Eq "pve-manager/(7\.[0-9]|8\.[0-9])"; then echo -e "${CROSS} This version of Proxmox Virtual Environment is not supported" echo -e "Requires PVE Version 7.0 or higher" echo -e "Exiting..." sleep 2 exit fi } # This function checks the system architecture and exits if it's not "amd64". arch_check() { if [ "$(dpkg --print-architecture)" != "amd64" ]; then echo -e "\n ${CROSS} This script will not work with PiMox! \n" echo -e "Exiting..." sleep 2 exit fi } # This function checks if the script is running through SSH and prompts the user to confirm if they want to proceed or exit. ssh_check() { if command -v pveversion >/dev/null 2>&1; then if [ -n "${SSH_CLIENT:+x}" ]; then if whiptail --backtitle "Proxmox VE Helper Scripts" --defaultno --title "SSH DETECTED" --yesno "It's suggested to use the Proxmox shell instead of SSH, since SSH can create issues while gathering variables. Would you like to proceed with using SSH?" 10 62; then echo "you've been warned" else clear exit fi fi fi } # This function displays the default values for various settings. echo_default() { echo -e "${DGN}Using Distribution: ${BGN}$var_os${CL}" echo -e "${DGN}Using $var_os Version: ${BGN}$var_version${CL}" echo -e "${DGN}Using Container Type: ${BGN}$CT_TYPE${CL}" echo -e "${DGN}Using Root Password: ${BGN}Automatic Login${CL}" echo -e "${DGN}Using Container ID: ${BGN}$NEXTID${CL}" echo -e "${DGN}Using Hostname: ${BGN}$NSAPP${CL}" echo -e "${DGN}Using Disk Size: ${BGN}$var_disk${CL}${DGN}GB${CL}" echo -e "${DGN}Allocated Cores ${BGN}$var_cpu${CL}" echo -e "${DGN}Allocated Ram ${BGN}$var_ram${CL}" echo -e "${DGN}Using Bridge: ${BGN}vmbr0${CL}" echo -e "${DGN}Using Static IP Address: ${BGN}dhcp${CL}" echo -e "${DGN}Using Gateway Address: ${BGN}Default${CL}" echo -e "${DGN}Disable IPv6: ${BGN}No${CL}" echo -e "${DGN}Using Interface MTU Size: ${BGN}Default${CL}" echo -e "${DGN}Using DNS Search Domain: ${BGN}Host${CL}" echo -e "${DGN}Using DNS Server Address: ${BGN}Host${CL}" echo -e "${DGN}Using MAC Address: ${BGN}Default${CL}" echo -e "${DGN}Using VLAN Tag: ${BGN}Default${CL}" echo -e "${DGN}Enable Root SSH Access: ${BGN}No${CL}" if [[ "$APP" == "Docker" || "$APP" == "Umbrel" || "$APP" == "CasaOS" || "$APP" == "Home Assistant" ]]; then echo -e "${DGN}Enable Fuse Overlayfs (ZFS): ${BGN}No${CL}" fi echo -e "${DGN}Enable Verbose Mode: ${BGN}No${CL}" echo -e "${BL}Creating a ${APP} LXC using the above default settings${CL}" } # This function is called when the user decides to exit the script. It clears the screen and displays an exit message. exit-script() { clear echo -e "⚠ User exited script \n" exit } # This function allows the user to configure advanced settings for the script. advanced_settings() { whiptail --backtitle "Proxmox VE Helper Scripts" --msgbox --title "Here is an instructional tip:" "To make a selection, use the Spacebar." 8 58 whiptail --backtitle "Proxmox VE Helper Scripts" --msgbox --title "Default distribution for $APP" "${var_os} \n${var_version} \n \nIf the default Linux distribution is not adhered to, script support will be discontinued. \n" 11 58 if [ "$var_os" != "alpine" ]; then var_os="" while [ -z "$var_os" ]; do if var_os=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "DISTRIBUTION" --radiolist "Choose Distribution:" 10 58 2 \ "debian" "" OFF \ "ubuntu" "" OFF \ 3>&1 1>&2 2>&3); then if [ -n "$var_os" ]; then echo -e "${DGN}Using Distribution: ${BGN}$var_os${CL}" fi else exit-script fi done fi if [ "$var_os" == "debian" ]; then var_version="" while [ -z "$var_version" ]; do if var_version=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "DEBIAN VERSION" --radiolist "Choose Version" 10 58 2 \ "11" "Bullseye" OFF \ "12" "Bookworm" OFF \ 3>&1 1>&2 2>&3); then if [ -n "$var_version" ]; then echo -e "${DGN}Using $var_os Version: ${BGN}$var_version${CL}" fi else exit-script fi done fi if [ "$var_os" == "ubuntu" ]; then var_version="" while [ -z "$var_version" ]; do if var_version=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "UBUNTU VERSION" --radiolist "Choose Version" 10 58 3 \ "20.04" "Focal" OFF \ "22.04" "Jammy" OFF \ "23.04" "Lunar" OFF \ 3>&1 1>&2 2>&3); then if [ -n "$var_version" ]; then echo -e "${DGN}Using $var_os Version: ${BGN}$var_version${CL}" fi else exit-script fi done fi CT_TYPE="" while [ -z "$CT_TYPE" ]; do if CT_TYPE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "CONTAINER TYPE" --radiolist "Choose Type" 10 58 2 \ "1" "Unprivileged" OFF \ "0" "Privileged" OFF \ 3>&1 1>&2 2>&3); then if [ -n "$CT_TYPE" ]; then echo -e "${DGN}Using Container Type: ${BGN}$CT_TYPE${CL}" fi else exit-script fi done if PW1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "\nSet Root Password (needed for root ssh access)" 9 58 --title "PASSWORD(leave blank for automatic login)" 3>&1 1>&2 2>&3); then if [ -z $PW1 ]; then PW1="Automatic Login" PW="" else PW="-password $PW1" fi echo -e "${DGN}Using Root Password: ${BGN}$PW1${CL}" else exit-script fi if CT_ID=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Container ID" 8 58 $NEXTID --title "CONTAINER ID" 3>&1 1>&2 2>&3); then if [ -z "$CT_ID" ]; then CT_ID="$NEXTID" echo -e "${DGN}Using Container ID: ${BGN}$CT_ID${CL}" else echo -e "${DGN}Container ID: ${BGN}$CT_ID${CL}" fi else exit fi if CT_NAME=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Hostname" 8 58 $NSAPP --title "HOSTNAME" 3>&1 1>&2 2>&3); then if [ -z "$CT_NAME" ]; then HN="$NSAPP" else HN=$(echo ${CT_NAME,,} | tr -d ' ') fi echo -e "${DGN}Using Hostname: ${BGN}$HN${CL}" else exit-script fi if DISK_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Disk Size in GB" 8 58 $var_disk --title "DISK SIZE" 3>&1 1>&2 2>&3); then if [ -z "$DISK_SIZE" ]; then DISK_SIZE="$var_disk" echo -e "${DGN}Using Disk Size: ${BGN}$DISK_SIZE${CL}" else if ! [[ $DISK_SIZE =~ $INTEGER ]]; then echo -e "${RD}⚠ DISK SIZE MUST BE AN INTEGER NUMBER!${CL}" advanced_settings fi echo -e "${DGN}Using Disk Size: ${BGN}$DISK_SIZE${CL}" fi else exit-script fi if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 $var_cpu --title "CORE COUNT" 3>&1 1>&2 2>&3); then if [ -z "$CORE_COUNT" ]; then CORE_COUNT="$var_cpu" echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}" else echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}" fi else exit-script fi if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 $var_ram --title "RAM" 3>&1 1>&2 2>&3); then if [ -z "$RAM_SIZE" ]; then RAM_SIZE="$var_ram" echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}" else echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}" fi else exit-script fi if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" 3>&1 1>&2 2>&3); then if [ -z "$BRG" ]; then BRG="vmbr0" echo -e "${DGN}Using Bridge: ${BGN}$BRG${CL}" else echo -e "${DGN}Using Bridge: ${BGN}$BRG${CL}" fi else exit-script fi while true; do NET=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Static IPv4 CIDR Address (/24)" 8 58 dhcp --title "IP ADDRESS" 3>&1 1>&2 2>&3) exit_status=$? if [ $exit_status -eq 0 ]; then if [ "$NET" = "dhcp" ]; then echo -e "${DGN}Using IP Address: ${BGN}$NET${CL}" break else if [[ "$NET" =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}/([0-9]|[1-2][0-9]|3[0-2])$ ]]; then echo -e "${DGN}Using IP Address: ${BGN}$NET${CL}" break else whiptail --backtitle "Proxmox VE Helper Scripts" --msgbox "$NET is an invalid IPv4 CIDR address. Please enter a valid IPv4 CIDR address or 'dhcp'" 8 58 fi fi else exit-script fi done if [ "$NET" != "dhcp" ]; then while true; do GATE1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Enter gateway IP address" 8 58 --title "Gateway IP" 3>&1 1>&2 2>&3) if [ -z "$GATE1" ]; then whiptail --backtitle "Proxmox VE Helper Scripts" --msgbox "Gateway IP address cannot be empty" 8 58 elif [[ ! "$GATE1" =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]]; then whiptail --backtitle "Proxmox VE Helper Scripts" --msgbox "Invalid IP address format" 8 58 else GATE=",gw=$GATE1" echo -e "${DGN}Using Gateway IP Address: ${BGN}$GATE1${CL}" break fi done else GATE="" echo -e "${DGN}Using Gateway IP Address: ${BGN}Default${CL}" fi if (whiptail --backtitle "Proxmox VE Helper Scripts" --defaultno --title "IPv6" --yesno "Disable IPv6?" 10 58); then DISABLEIP6="yes" else DISABLEIP6="no" fi echo -e "${DGN}Disable IPv6: ${BGN}$DISABLEIP6${CL}" if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" 3>&1 1>&2 2>&3); then if [ -z $MTU1 ]; then MTU1="Default" MTU="" else MTU=",mtu=$MTU1" fi echo -e "${DGN}Using Interface MTU Size: ${BGN}$MTU1${CL}" else exit-script fi if SD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a DNS Search Domain (leave blank for HOST)" 8 58 --title "DNS Search Domain" 3>&1 1>&2 2>&3); then if [ -z $SD ]; then SX=Host SD="" else SX=$SD SD="-searchdomain=$SD" fi echo -e "${DGN}Using DNS Search Domain: ${BGN}$SX${CL}" else exit-script fi if NX=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a DNS Server IP (leave blank for HOST)" 8 58 --title "DNS SERVER IP" 3>&1 1>&2 2>&3); then if [ -z $NX ]; then NX=Host NS="" else NS="-nameserver=$NX" fi echo -e "${DGN}Using DNS Server IP Address: ${BGN}$NX${CL}" else exit-script fi if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address(leave blank for default)" 8 58 --title "MAC ADDRESS" 3>&1 1>&2 2>&3); then if [ -z $MAC1 ]; then MAC1="Default" MAC="" else MAC=",hwaddr=$MAC1" echo -e "${DGN}Using MAC Address: ${BGN}$MAC1${CL}" fi else exit-script fi if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" 3>&1 1>&2 2>&3); then if [ -z $VLAN1 ]; then VLAN1="Default" VLAN="" else VLAN=",tag=$VLAN1" fi echo -e "${DGN}Using Vlan: ${BGN}$VLAN1${CL}" else exit-script fi if [[ "$PW" == -password* ]]; then if (whiptail --backtitle "Proxmox VE Helper Scripts" --defaultno --title "SSH ACCESS" --yesno "Enable Root SSH Access?" 10 58); then SSH="yes" else SSH="no" fi echo -e "${DGN}Enable Root SSH Access: ${BGN}$SSH${CL}" else SSH="no" echo -e "${DGN}Enable Root SSH Access: ${BGN}$SSH${CL}" fi if [[ "$APP" == "Docker" || "$APP" == "Umbrel" || "$APP" == "CasaOS" || "$APP" == "Home Assistant" ]]; then if (whiptail --backtitle "Proxmox VE Helper Scripts" --defaultno --title "FUSE OVERLAYFS" --yesno "(ZFS) Enable Fuse Overlayfs?" 10 58); then FUSE="yes" else FUSE="no" fi echo -e "${DGN}Enable Fuse Overlayfs (ZFS): ${BGN}$FUSE${CL}" fi if (whiptail --backtitle "Proxmox VE Helper Scripts" --defaultno --title "VERBOSE MODE" --yesno "Enable Verbose Mode?" 10 58); then VERB="yes" else VERB="no" fi echo -e "${DGN}Enable Verbose Mode: ${BGN}$VERB${CL}" if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "ADVANCED SETTINGS COMPLETE" --yesno "Ready to create ${APP} LXC?" 10 58); then echo -e "${RD}Creating a ${APP} LXC using the above advanced settings${CL}" else clear header_info echo -e "${RD}Using Advanced Settings${CL}" advanced_settings fi } install_script() { check_root ssh_check arch_check pve_check if systemctl is-active -q ping-instances.service; then systemctl -q stop ping-instances.service fi NEXTID=$(pvesh get /cluster/nextid) timezone=$(cat /etc/timezone) header_info if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "SETTINGS" --yesno "Use Default Settings?" --no-button Advanced 10 58); then header_info echo -e "${BL}Using Default Settings${CL}" default_settings else header_info echo -e "${RD}Using Advanced Settings${CL}" advanced_settings fi } start() { if command -v pveversion >/dev/null 2>&1; then if ! (whiptail --backtitle "Proxmox VE Helper Scripts" --title "${APP} LXC" --yesno "This will create a New ${APP} LXC. Proceed?" 10 58); then clear echo -e "⚠ User exited script \n" exit fi install_script fi if ! command -v pveversion >/dev/null 2>&1; then if ! (whiptail --backtitle "Proxmox VE Helper Scripts" --title "${APP} LXC UPDATE" --yesno "Support/Update functions for ${APP} LXC. Proceed?" 10 58); then clear echo -e "⚠ User exited script \n" exit fi update_script fi } # This function collects user settings and integrates all the collected information. build_container() { if [ "$VERB" == "yes" ]; then set -x; fi if [[ "$APP" == "Docker" || "$APP" == "Umbrel" || "$APP" == "CasaOS" || "$APP" == "Home Assistant" ]]; then if [ "$FUSE" == "yes" ]; then FEATURES="fuse=1,keyctl=1,nesting=1" else FEATURES="keyctl=1,nesting=1" fi fi if [[ "$APP" != "Docker" && "$APP" != "Umbrel" && "$APP" != "CasaOS" && "$APP" != "Home Assistant" ]]; then if [ "$CT_TYPE" == "1" ]; then FEATURES="keyctl=1,nesting=1" else FEATURES="nesting=1" fi fi TEMP_DIR=$(mktemp -d) pushd $TEMP_DIR >/dev/null if [ "$var_os" == "alpine" ]; then export FUNCTIONS_FILE_PATH="$(curl -s https://raw.githubusercontent.com/tteck/Proxmox/main/misc/alpine-install.func)" else export FUNCTIONS_FILE_PATH="$(curl -s https://raw.githubusercontent.com/tteck/Proxmox/main/misc/install.func)" fi export tz="$timezone" if [[ "$APP" == "Docker" || "$APP" == "Umbrel" || "$APP" == "CasaOS" || "$APP" == "Home Assistant" ]]; then export ST="$FUSE" fi export DISABLEIPV6="$DISABLEIP6" export APPLICATION="$APP" export app="$NSAPP" export PASSWORD="$PW" export VERBOSE="$VERB" export SSH_ROOT="${SSH}" export CTID="$CT_ID" export CTTYPE="$CT_TYPE" export PCT_OSTYPE="$var_os" export PCT_OSVERSION="$var_version" export PCT_DISK_SIZE="$DISK_SIZE" export PCT_OPTIONS=" -features $FEATURES -hostname $HN -tags proxmox-helper-scripts $SD $NS -net0 name=eth0,bridge=$BRG$MAC,ip=$NET$GATE$VLAN$MTU -onboot 1 -cores $CORE_COUNT -memory $RAM_SIZE -unprivileged $CT_TYPE $PW " # This executes create_lxc.sh and creates the container and .conf file bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/ct/create_lxc.sh)" || exit LXC_CONFIG=/etc/pve/lxc/${CTID}.conf if [ "$CT_TYPE" == "0" ]; then cat <>$LXC_CONFIG # USB passthrough lxc.cgroup2.devices.allow: a lxc.cap.drop: lxc.cgroup2.devices.allow: c 188:* rwm lxc.cgroup2.devices.allow: c 189:* rwm lxc.mount.entry: /dev/serial/by-id dev/serial/by-id none bind,optional,create=dir lxc.mount.entry: /dev/ttyUSB0 dev/ttyUSB0 none bind,optional,create=file lxc.mount.entry: /dev/ttyUSB1 dev/ttyUSB1 none bind,optional,create=file lxc.mount.entry: /dev/ttyACM0 dev/ttyACM0 none bind,optional,create=file lxc.mount.entry: /dev/ttyACM1 dev/ttyACM1 none bind,optional,create=file EOF fi if [ "$CT_TYPE" == "0" ]; then if [[ "$APP" == "Emby" || "$APP" == "Jellyfin" || "$APP" == "Plex" || "$APP" == "Scrypted" || "$APP" == "Tdarr" || "$APP" == "Unmanic" ]]; then cat <>$LXC_CONFIG # VAAPI hardware transcoding lxc.cgroup2.devices.allow: c 226:0 rwm lxc.cgroup2.devices.allow: c 226:128 rwm lxc.cgroup2.devices.allow: c 29:0 rwm lxc.mount.entry: /dev/fb0 dev/fb0 none bind,optional,create=file lxc.mount.entry: /dev/dri dev/dri none bind,optional,create=dir lxc.mount.entry: /dev/dri/renderD128 dev/dri/renderD128 none bind,optional,create=file EOF fi fi # This starts the container and executes -install.sh msg_info "Starting LXC Container" pct start "$CTID" msg_ok "Started LXC Container" if [ "$var_os" == "alpine" ]; then sleep 2 pct exec "$CTID" -- ash -c "apk add bash >/dev/null" fi lxc-attach -n "$CTID" -- bash -c "$(wget -qLO - https://raw.githubusercontent.com/tteck/Proxmox/main/install/$var_install.sh)" || exit } # This function sets the description of the container. description() { IP=$(pct exec "$CTID" ip a s dev eth0 | awk '/inet / {print $2}' | cut -d/ -f1) pct set "$CTID" -description "
# ${APP} LXC
" if [[ -f /etc/systemd/system/ping-instances.service ]]; then systemctl start ping-instances.service fi }